The most innovative immunochemical FOB test, EpiTuub™ FOB uses the unique and advanced methodology breakthrough in immunochemical FOB test with higher sensitivity and specificity to detect faecal blood.
Patient Instructions
Collect a stool sample using the enclosed stool sampling paper: a. Clean the bowl and flush the toilet two times. Unfold an lay the Sample Collection Paper directly on the top of the water in the toilet bowl (the paper should float above the water).
After bowel movement, proceed to Sample Collection Section.
Easy sample collection procedure without unpleasant feeling.
Sample Collection
1.Take the sampling tube and unscrew the sampling lid, keeping the sampling tube in a vertical position to prevent loss of solution.
2. Hold the sampling lid by the Thumb Grip.
3. Use the tip of the sampling lid to collect a small amount of fecal sample at two or more sites. Only take the fecal sample that sticks to the sampling lid tip (never intentionally place any separate piece of fecal sample into the tube).
4. Insert and screw the sampling lid in a vertical position. Do not spill any solution from the tube.
5.Tightly seal the lid with the tube.
6. Flush the toilet.
Test Procedure
1. Shake to dissolve the stool into solution.
2.Turn the sampling tube upside down vertically.
3. Remove the test strip from foil pouch.
4. Insert and screw the test strip in a vertical position into the sampling tube by breaking the bottom seal of the sampling tube.
5.Allow the solution to flow into the bottom space of test strip, keeping the device in a vertical position.
6.You may soon see a red fluid moving across the white area of the test strip.
7. Read test results in five minutes. DO NOT INTERPRET RESULT AFTER 10 MINUTES.
Collect a stool sample using the enclosed stool sampling paper: a. Clean the bowl and flush the toilet two times. Unfold an lay the Sample Collection Paper directly on the top of the water in the toilet bowl (the paper should float above the water).
After bowel movement, proceed to Sample Collection Section.
1.Take the sampling tube and unscrew the sampling lid, keeping the sampling tube in a vertical position to prevent loss of solution.
7. Read test results in five minutes. DO NOT INTERPRET RESULT AFTER 10 MINUTES.